PVC HEAT SHTINK CAPSULES

PVC high-end material, shrink tight, easy to tear, not easy to crack, not fade, size customization, color customization.
The printing is clear, the gloss is good, the color is bright, and the water resistance is good.
PVC heat shrinkable caps have high-quality practicability, moisture resistance, high shrinkage, high toughness, acid and alkali resistance and other physical properties, and the packaging process is simple, beautiful in appearance, firm packaging, can improve the added value of packaging products, widely used in articles for daily use.

The production principle of the material:
The stable state of the polymer chain tends to be a coiled state. When the polymer is heated and melted in a highly elastic state, the polymer chain is stretched and oriented under the action of external force, and after the rapid cooling reaches the glass transition temperature, the orientation state of the polymer chain is frozen. When the temperature rises again, the polymer chain tends to be in a stable state, coiling occurs, and macroscopically, it appears as shrinkage.
1. The surface of the PVC heat shrinkable film is smooth, uniform in thickness and thickness, no significant spots, no oil stains, impurities, or folding, which can improve the quality of product packaging.
2. After the packaging is shrunk, it is stored under the natural environment standard of 30 degrees, and there will be no color change such as fading and fading.
3. The PVC shrink film can be tightly packed, firm, waterproof, moisture-proof, dust-proof and beautiful.
PVC heat shrinkable film has the characteristics of good transparency, easy shrinkage, high strength, and the shrinkage rate can be adjusted at will according to customer needs. In addition, the application is very simple, only need to use hot air to stick the film to the product.
PVC heat shrinkable film has good transparency and high shrinkage rate, between 35% and 45% in the transverse direction, and its cost is low, the tensile strength is large, the temperature shrinkage range is large, and the heat source requirements are not high (80-100 ℃) , the main processing heat source is hot air, infrared or a combination of the two.